WR Long 3rd function valve pics

[Gordon Gould]

On those valves are the two knobs, top and bottom of valve, adjustable flow control restrictors or something else ?? Thanks

gg

 

[Tomtint]

My WR Long on the L3700 SU

 

[coolbrze]

Prob. going to do the install this weekend. Any special tools/supplies I need for it?

 

[Tomtint]

Prob. going to do the install this weekend. Any special tools/supplies I need for it?

A few wrenches, wire cutters, heat shrink tubing ,maybe a solder kit and a few zip ties

 

[jblac197]

Prob. going to do the install this weekend. Any special tools/supplies I need for it?

Just some basic wrenches/sockets zip ties, wire stripper. Don't really need much.

 

[coolbrze]

Thanks again!

 

[coolbrze]

Just wanted to drop a line & say thanks for the help. Installed the WR Long 3rd function valve today, took me a few hrs. but a pretty darn easy install. One question I have is the 2 hydraulic hoses that run from the loader valve to the grapple (along the loader arm) are awkward. What did you all do to mount them in a safe position?

 

[Tomtint]

Just wanted to drop a line & say thanks for the help. Installed the WR Long 3rd function valve today, took me a few hrs. but a pretty darn easy install. One question I have is the 2 hydraulic hoses that run from the loader valve to the grapple (along the loader arm) are awkward. What did you all do to mount them in a safe position?

I zip tied them to the steel lines on the inside of the loader arm, Left plenty of slack and play as well.

 

[Redbug]

I zip tied them to the steel lines on the inside of the loader arm, Left plenty of slack and play as well.

Same thing here.

 

[jblac197]

Just wanted to drop a line & say thanks for the help. Installed the WR Long 3rd function valve today, took me a few hrs. but a pretty darn easy install. One question I have is the 2 hydraulic hoses that run from the loader valve to the grapple (along the loader arm) are awkward. What did you all do to mount them in a safe position?

I laid the side by side and zip tied them to the side of the loader arm. I tried to go under the arm but just wasn't enough room