Working under a ztr - how?

   / Working under a ztr - how? #1  

lhfarm

Veteran Member
Joined
May 17, 2002
Messages
1,320
Location
Central Indiana
Tractor
NH TC40DA
I have a Snapper ZTR that has developed a fluid leak that is running along the farme. I'm trying to figure out the source and can't see anyting from the top or from looking underneath the engine. I need to get the mower up off the ground enough so I can see what is going on. What is a safe method, both for me and the mower?

I don't have car ramps, but do have a tractor with an FEL. I do have jack stands. Suggestions?
 
   / Working under a ztr - how? #2  
How much does the mower weigh? If I could lift it with my loader I would and then put it on a pair of saw horses or concrete cinder blocks. Can you just prop it up on it's backside?
 
   / Working under a ztr - how? #3  
I lift mine w/ a chain and the hooks on the FEL. I leave the back wheels on the ground, place blocks behind the tires to avoid it rolling back and lift the fron end of the mower up to get underneath.
 
   / Working under a ztr - how? #4  
I lift mine w/ a chain and the hooks on the FEL. I leave the back wheels on the ground, place blocks behind the tires to avoid it rolling back and
1*lift the front end of the mower up to get underneath.
1*What keeps it from falling on you when you are under it?
 

Tractor & Equipment Auctions

LG 60" PIN ON WHEEL LOADER FORKS (A51242)
LG 60" PIN ON...
2010 International 4400 National Crane 300C Crane Truck (A50323)
2010 International...
2011 L3 GENERATOR SET (A51222)
2011 L3 GENERATOR...
71067 (A49346)
71067 (A49346)
2013 Chevrolet Caprice Sedan (A50324)
2013 Chevrolet...
VENTRAC 4500Z ARTICULATING TRACTOR (A51242)
VENTRAC 4500Z...
 
Top