Will this end cap work?

   / Will this end cap work?
  • Thread Starter
#11  
I know it's in the directional valve, but where is the relief valve? Seriously. I don't want to just start tearing it apart. (like I usually do :))
 
   / Will this end cap work?
  • Thread Starter
#12  
I believe it is a Cross brand valve, if that makes a difference. Have been looking online but cannot find a cut away or layout of that brand.
 
   / Will this end cap work? #13  
Just search cross mfg.
 
   / Will this end cap work?
  • Thread Starter
#14  
OK so I found this, but the info below does not label anything.

Manuals-and-Options_Directional-Control-Valves-Technical-Service-Manual_Production-Drawing.jpg


From looking at the diagram, it would seem to me, the spring loaded valve on the end opposite the handle is the spring tension you feel when using the valve, and so the spring valve next to the handle must be the relief valve?

My next question is do I simply undo the nut that holds it together, to check and free up the relief valve? I fear if I turn it at all I may be adjusting it, and I have no pressure gauge to test with.
 

Tractor & Equipment Auctions

2019 CATERPILLAR 299D2 SKID STEER (A51242)
2019 CATERPILLAR...
New Idea Manure Spreader (A50515)
New Idea Manure...
(4) Texas Built 25' Stand Alone Panels (A50515)
(4) Texas Built...
2015 CATERPILLAR 326FL LONG REACH EXCAVATOR (A51242)
2015 CATERPILLAR...
HUNTER SYSTEM 700 TIRE BALANCER (A50854)
HUNTER SYSTEM 700...
Takeuchi Skid Steer (A49461)
Takeuchi Skid...
 
Top