OP
handirifle
Veteran Member
I know it's in the directional valve, but where is the relief valve? Seriously. I don't want to just start tearing it apart. (like I usually do 
)
)Will this end cap work?
- Thread starter handirifle
- Start date
- Views: 2031
OP
handirifle
Veteran Member
I believe it is a Cross brand valve, if that makes a difference. Have been looking online but cannot find a cut away or layout of that brand.
Leejohn
Elite Member
Just search cross mfg.
OP
handirifle
Veteran Member
OK so I found this, but the info below does not label anything.
From looking at the diagram, it would seem to me, the spring loaded valve on the end opposite the handle is the spring tension you feel when using the valve, and so the spring valve next to the handle must be the relief valve?
My next question is do I simply undo the nut that holds it together, to check and free up the relief valve? I fear if I turn it at all I may be adjusting it, and I have no pressure gauge to test with.
From looking at the diagram, it would seem to me, the spring loaded valve on the end opposite the handle is the spring tension you feel when using the valve, and so the spring valve next to the handle must be the relief valve?
My next question is do I simply undo the nut that holds it together, to check and free up the relief valve? I fear if I turn it at all I may be adjusting it, and I have no pressure gauge to test with.