widen rear tires
- Thread starter chuck172
- Start date
- Views: 3320
If your centers don't unbolt from the ring then the answr is no, I'm pretty sure you cant change the offset the only thing you could do to widen them would be to use longer wheel studs and have some spacers machined.
VictorW
Veteran Member
If they're R4 tires, solid centers welded to the rims, then no. These are out as far as they can go. I haven't seen the rims with ag tires to know if they can be unbolted as somguyss mentioned.
k0ua
Epic Contributor
One picture would help a lot
vtsnowedin
Elite Member
Spacers will work or you could trade for a different tractor.
SSdoxie
Elite Member
Spacers will work or you could trade for a different tractor.
Or get new 2 piece wheels with rim width to match the R4s. Pretty sure Titan has them.
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
You also want to measure the offset on both the inside and outside of the wheel. If the offset is greater on the inside, swapping the wheels side to side might be worthwhile. Remember, R-4s are uni-directional, so it would have to be a side to side swap.
SSdoxie
Elite Member
Just browsing Bobcat's online catalog, lo & behold Bobcat shows a 2 piece rim for use on R4 & R1 tires on DK equivalent tractors.
Citydude
Elite Member
Spacers will work or you could trade for a different tractor.
I agree with the spacers.
