why x585 backfires when starting
- Thread starter fbergman
- Start date
- Views: 3384
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,541
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Welcome to TBN
How much backfire? just a pop? or a louder bang? (if that makes sense).
Sounds like fuel mixture.
Did you treat the gas with something like seafoam before storing over winter?
How much backfire? just a pop? or a louder bang? (if that makes sense).
Sounds like fuel mixture.
Did you treat the gas with something like seafoam before storing over winter?
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,541
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
When my fuel injection X485 was newer, I occasionally had a pop on startup. But after running, was ok (no pop).
Recent years, no pop on startup.
Have learned a quicker (better?) start-up routine by turning over the engine for a second or three. Turn key off, then back on start again. Engine fires off in much shorter crank time with this double start plan.
Not sure why, but like it better than grinding away for a "longer time" (ha!, all of 10 seconds).
Recent years, no pop on startup.
Have learned a quicker (better?) start-up routine by turning over the engine for a second or three. Turn key off, then back on start again. Engine fires off in much shorter crank time with this double start plan.
Not sure why, but like it better than grinding away for a "longer time" (ha!, all of 10 seconds).
BravoXray
Elite Member
- Joined
- Dec 17, 2019
- Messages
- 2,699
- Location
- Nothern Indiana
- Tractor
- Kubota BX2230, John Deere 430 Diesel
Put a new spark plug in it.
ruffdog
Super Star Member
- Joined
- Dec 31, 2011
- Messages
- 10,710
- Location
- southern wisconsin
- Tractor
- Bobcat Toolcat 5610G, Deere X744, Cub Cadet IH 982
Has the valves been adjusted? If they are getting a bit loose, that can affect the decompression mechanism during startup.
Richard001
Veteran Member
Does it start in spite of the backfire ?
agree, esp if it's never been done previously. change the spark as mentioned too (also check if spark temp is within correct specs of engine) are you using non ethanol?
Last edited:
