Whoops!

[Momboy007]

Hello All,
I was out disking my place this afternoon and all of the sudden the disk was dangling by only the top link and one sway bar on the lower 3 PH.
I stopped the tractor and found one of the lower bar pins, closest to the rear end, had somehow worked loose and disappeared. I looked high and low, but think somehow, it got burried by the disk. I looked at the other side and noticed that the pin is locked into place with a set type screw/bolt.

How do I order another for a Jinma 304? Any idea's who would carry one of these?

I need one ASAP to continue my disking

Thanks in advance for any help anyone can offer

Rick

 

[greg_g]

Not sure from your description what actually went missing. Perhaps you can identify the part from the attached diagram. Or did you lose the pivot pin/fastener that actually holds the liftarm (#21) swivel ball to the axle housing ? I think that's #34-38 in the second diagram

//greg//

 

[Momboy007]

Hello Greg,
Yes I lost 34-38, on my parts manual for the tractor, it looks a little different, but I lost the screw that holds it in and then I guess the fastener just worked it way out.
Any idea where to get one?
Thanks,
Rick

 

[greg_g]

Well, that's not the most common part to lose in the field. So it's probably not listed in too many online Jinma parts catalogs. but there are several Jinma dealers that participate here. If none of them respond to your issue within a reasonable amount of time, click on the DEALERS tab above and go from there

//greg//

 

[Affordable]

Hey Rick,I'm out of the office today but I'm sure we have the parts.Call Jerry in the morning 979-865-4002 and he can get you fixed up

Tommy
Affordable Tractor Sales

 

[Momboy007]

Thanks Tommy,
I will do that
Rick