Wheel Lug Bolt (Stud) for JD2210

scsi2005 · Feb 26, 2019

High everyone.
A quick question.
I bought wheel extenders for my JD2210 tractor and would like to use longer wheel lugs to secure them to the axle. I can not find the metric values. Is it a 10x1.25 or a 10x1.50?
And does anyone know where I get them that are about 35-40 mm long. I can cut them shorter after I add a lock nut to bolt.
Thanks in advance.
Steve

Zebrafive · Feb 27, 2019

According to JD parts it's NOT a Metric bolt: P/N M144698.
It's 7/16-20 with an overall length of 1.4"
How long, overall, do you need?

The only longer from JD is P/N M177386 1.7" overall

Auto parts store might be able to supply longer.

WranglerX · Feb 27, 2019

Try matching diameter and thread pitch to DORMAN products catalog..... They have literally hundreds of "wheel" products in both SAE and metric....

Dale

scsi2005 · Feb 27, 2019

Thank you both for the help. I just thought everything had gone metric lately.
Thanks again.
Steve

WranglerX · Mar 1, 2019

Here is Dorman catalog... Cruise through section 10 for lug bolts/studs/nuts....

https://www.dormanproducts.com/flipbook/dorman/automotive-hardware/2006-automotive-hardware.pdf

Dale

scsi2005 · Mar 1, 2019

Just some info for you Dale,
The JD2210 has 7/16" lug bolts and not metric. Its pretty hard searching for spacers to match with 7/16".
I bought a $275.00 set from Bora which said they would fit my tractor but they supplied me with 12mm bolts and the holes were to big for the 7/16" and I destroyed one side by using my 7/16" bolts..
I am working with them to get this corrected at this time.
Thanks again.
Steve
Steve