What's wrong with this picture
- Thread starter Sedgewood
- Start date
- Views: 1069
Bob999
Platinum Member
Re: What\'s wrong with this picture
Is there a hole in the filter? And a guage that shows vacuum?
Is there a hole in the filter? And a guage that shows vacuum?
Egon
Epic Contributor
Re: What\'s wrong with this picture
Are you talking about the stater cable and muffler by any chance or are the filter threads stripped and the jug is holding it up??
Egon
Are you talking about the stater cable and muffler by any chance or are the filter threads stripped and the jug is holding it up??
Egon
- Joined
- Aug 31, 2001
- Messages
- 66,061
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Re: What\'s wrong with this picture
That plastic jug isn't OEM!
That plastic jug isn't OEM!
- Joined
- Aug 31, 2001
- Messages
- 66,061
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Re: What\'s wrong with this picture
There's a little hole in the filter. Now, that's pretty smart! Why didn't I think of something like that??? Grrrr. All this time I get a few handfuls of fluid when changing filters and now I see all it takes is a little hole and a drain pan. Again, I say Grrr!! That's what happens when you get raised by artists... no mechanical training whatsoever. /forums/images/graemlins/tongue.gif
There's a little hole in the filter. Now, that's pretty smart! Why didn't I think of something like that??? Grrrr. All this time I get a few handfuls of fluid when changing filters and now I see all it takes is a little hole and a drain pan. Again, I say Grrr!! That's what happens when you get raised by artists... no mechanical training whatsoever. /forums/images/graemlins/tongue.gif
- Joined
- Aug 31, 2001
- Messages
- 66,061
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Re: What\'s wrong with this picture
I'm with Bob999... if there is a hole in the filter, shouldn't the gauge be at zero?
I'm with Bob999... if there is a hole in the filter, shouldn't the gauge be at zero?
Re: What\'s wrong with this picture
MossRoad: <font color="green"> That's what happens when you get raised by artists... no mechanical training whatsoever. </font>
It's ok to color outside the lines. Really. /forums/images/graemlins/grin.gif
Bodger's Rule #1: there are no rules.
Sedgewood
MossRoad: <font color="green"> That's what happens when you get raised by artists... no mechanical training whatsoever. </font>
It's ok to color outside the lines. Really. /forums/images/graemlins/grin.gif
Bodger's Rule #1: there are no rules.
Sedgewood
Re: What\'s wrong with this picture
MossRoad: <font color="green"> There's a little hole in the filter. Now, that's pretty smart! Why didn't I think of something like that??? </font>
Surely you didn't miss the second, smaller hole at the top of the filter - the vent /forums/images/graemlins/tongue.gif
Should I admit that it took me 7 filter changes to toss the fancy enamelled catch pan that didn't really fit under the filter and make a catcher that actually catches?
Then there's the patience issue of waiting until the filter finishes draining before pulling out the pan, but we won't go there. /forums/images/graemlins/tongue.gif
Sedgewood
MossRoad: <font color="green"> There's a little hole in the filter. Now, that's pretty smart! Why didn't I think of something like that??? </font>
Surely you didn't miss the second, smaller hole at the top of the filter - the vent /forums/images/graemlins/tongue.gif
Should I admit that it took me 7 filter changes to toss the fancy enamelled catch pan that didn't really fit under the filter and make a catcher that actually catches?
Then there's the patience issue of waiting until the filter finishes draining before pulling out the pan, but we won't go there. /forums/images/graemlins/tongue.gif
Sedgewood
- Joined
- Aug 31, 2001
- Messages
- 66,061
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Re: What\'s wrong with this picture
<font color="blue"> It's ok to color outside the lines. Really. </font>
Yep! We had no lines to start with so there was no problem there /forums/images/graemlins/grin.gif
And I saw the little mark at the top of the filter. Just didn't realize it went all the way through. Things are so easy when I have someone else think of them for me /forums/images/graemlins/blush.gif
<font color="blue"> It's ok to color outside the lines. Really. </font>
Yep! We had no lines to start with so there was no problem there /forums/images/graemlins/grin.gif
And I saw the little mark at the top of the filter. Just didn't realize it went all the way through. Things are so easy when I have someone else think of them for me /forums/images/graemlins/blush.gif
Re: What\'s wrong with this picture
MossRoad: <font color="green"> I'm with Bob999... if there is a hole in the filter, shouldn't the gauge be at zero? </font>
Yep. It should. You guys nailed it /forums/images/graemlins/grin.gif
It seems the gauge is too close to the exhaust for comfort - one side of the plastic housing caved in enough to keep the needle from zeroing. The next one will have a metal housing. On those days I'm not too extravagant for my own good I'm too cheap. /forums/images/graemlins/tongue.gif
Sedgewood
MossRoad: <font color="green"> I'm with Bob999... if there is a hole in the filter, shouldn't the gauge be at zero? </font>
Yep. It should. You guys nailed it /forums/images/graemlins/grin.gif
It seems the gauge is too close to the exhaust for comfort - one side of the plastic housing caved in enough to keep the needle from zeroing. The next one will have a metal housing. On those days I'm not too extravagant for my own good I'm too cheap. /forums/images/graemlins/tongue.gif
Sedgewood
