CountryBoy
Silver Member
Something a JD 4410 could handle? I am talking about something you could wade into the brush and saplings and make it happen and hold up well for years.
Rotary Cutter Whats the biggest meanest rotary cutter for a.....
- Thread starter CountryBoy
- Start date
- Views: 3421
Chief
Gold Member
Re: Whats the biggest meanest rotary cutter for a.
Land Pride RCR 2660 or an MX6. I thing the John Deere 609 HD rotary cutter would be too heavy.
Land Pride RCR 2660 or an MX6. I thing the John Deere 609 HD rotary cutter would be too heavy.
JerryG
Super Member
I personally like a Woods because of the way the blades are removed. But if you want real heavy duty, you might want to look into a Brown. JMIII has one. Brown Rotary Cutters
JohnMiller3
Elite Member
- Joined
- Jan 15, 2001
- Messages
- 2,517
- Location
- Capital District, Upstate New York
- Tractor
- Satoh S650G, MF135, MF165, JD5205
For your size tractor and available PTO hp... take a look at BushHog's Model 12 & 305 for Mid to HD cutting capacity and durability...
There are other heftier units out there... but I'm afraid your 29/30 PTO hp max is the limiting factor... along with the 3-pt hitch rating...
There are other heftier units out there... but I'm afraid your 29/30 PTO hp max is the limiting factor... along with the 3-pt hitch rating...
GreenMtnMan
Silver Member
Re: Whats the biggest meanest rotary cutter for a.
I'd second the JD MX6 recommendation - I've got an MX5 and it's awesome. JD sells even heavier duty units in their HX series but I'm not sure your 4410 has the pto hp for those.
I'd second the JD MX6 recommendation - I've got an MX5 and it's awesome. JD sells even heavier duty units in their HX series but I'm not sure your 4410 has the pto hp for those.
Gatorboy
Elite Member
- Joined
- Aug 5, 2001
- Messages
- 3,138
- Location
- Bel Air, MD
- Tractor
- Kubota M8950, Bobcat 873 SSL & Kubota ZD-331
How about a Rhino GR60? It requires a PTO of 30 HP, which is what I believe your 4410 is.
JohnMiller3
Elite Member
- Joined
- Jan 15, 2001
- Messages
- 2,517
- Location
- Capital District, Upstate New York
- Tractor
- Satoh S650G, MF135, MF165, JD5205
Hi Dave,
The GR60 is an outstanding unit (I just got an older Servis unit)... but the gyro bar is very heavy... and I don't believe the 4410 could handle the 3-pt version... but obviously the tow/trailer unit... ~ 1300-1400 lbs?
Another Rhino choice would be the CY60... /forums/images/graemlins/smile.gif
The GR60 is an outstanding unit (I just got an older Servis unit)... but the gyro bar is very heavy... and I don't believe the 4410 could handle the 3-pt version... but obviously the tow/trailer unit... ~ 1300-1400 lbs?
Another Rhino choice would be the CY60... /forums/images/graemlins/smile.gif
kensfarm
Veteran Member
The meanest.. Rhino's "Lumber Jack" LJ72 has a cutting capacity of 6 inches... 2500 lbs and requires a min of 90 PTO HP.. deck is 1/4 inch.. sides are 1/2 inch thick.
Gatorboy
Elite Member
- Joined
- Aug 5, 2001
- Messages
- 3,138
- Location
- Bel Air, MD
- Tractor
- Kubota M8950, Bobcat 873 SSL & Kubota ZD-331
Given that CountryBoy only has a 30 PTO HP tractor, your choice is out of his league. /forums/images/graemlins/ooo.gif
kensfarm
Veteran Member
Gatorboy.. you are right.. got hooked on the title.. "biggest meanest".. I was just going for the meanest. The 5 foot medium duty cutters would be the limit for 30 PTO HP.
