Shield Arc
Super Member
Great deal Carol! I'm really happy for you:thumbsup:. Concentrate on the sound of the weld, it tells you every thing that is going on with the weld.
Welding - next step
- Thread starter Carol in CA
- Start date
- Views: 3166
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 14,548
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Probably the best advice I got from SA.Great deal Carol! I'm really happy for you:thumbsup:. Concentrate on the sound of the weld, it tells you every thing that is going on with the weld.
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 14,548
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Getting sick of double posts and having to delete one. Happening way too much.
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 7,047
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
mikehaugen
Elite Member
I don't even bother deleting them anymore.
Not as bad as trying to fix or delete sideways photos.
Terry
If I am posting a picture from my phone I make sure I take the picture with the phone sideways.
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 7,047
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
My sideways ones were taken off my camera roll right side up. First time it's done that
Terry
CNC Dan
Veteran Member
Great deal Carol! I'm really happy for you:thumbsup:. Concentrate on the sound of the weld, it tells you every thing that is going on with the weld.
Sure does. That's how I maintain my arc length when stick welding, by the sound. That leaves my eyes free to watch the puddle.
And I've found that if I need to tig on thin steel (18ga) using the pluser lets me hear if I'm getting too close with the tungsten (too quiet).
Here are some similar links:
