Welded on hooks

   / Welded on hooks #1  

kcook

Platinum Member
Joined
Apr 30, 2001
Messages
778
Location
MI
Tractor
Cub Lawn Tractor
What might some one pay to get a couple of 3/8" hooks welded on a bucket at the dealer? For a CK 20

KC
 
   / Welded on hooks #2  
You might want to take your bucket directly to a welding shop instead of the tractor dealer. Sometimes dealers just take specialty work to another shop (e.g. welding or hydraulic cylinder work) and then charge you a bit more so they make something for their trouble.

To do it right they'd need to reinforce the bucket with a piece of angle iron or possibly a piece of plate steel. They would weld the reinforcement to the bucket and then weld the hooks to the reinforcement. If you brought the reinforcement steel and the hooks with you, I'm guessing (guessing!) that the welding might cost you $30. If you don't have the reinforcement steel, I think a welding shop could probably supply the reinforcement steel for a lot less than what a tractor dealer would charge (maybe another $10 for a couple of scrap cut-offs).

If you don't already have them, you can find weldable grab hooks by Googling "weldable grab hooks" without the quotation marks, or by going here:
Weldable Grab Hooks at AWDirect

The link to AWDirect was posted previously on TBN, and I ordered hooks from them and was satisfied with the price + shipping and order handling. I wish I could credit the previous poster, but I don't remember who it was.
 
   / Welded on hooks #3  
I brought it up to my dealer before getting my newly ordered CK20 delivered and they put them on for free. I bet most good dealers would do the same.
 
   / Welded on hooks
  • Thread Starter
#4  
TedLaRue said:
You might want to take your bucket directly to a welding shop instead of the tractor dealer. Sometimes dealers just take specialty work to another shop (e.g. welding or hydraulic cylinder work) and then charge you a bit more so they make something for their trouble.

To do it right they'd need to reinforce the bucket with a piece of angle iron or possibly a piece of plate steel. They would weld the reinforcement to the bucket and then weld the hooks to the reinforcement. If you brought the reinforcement steel and the hooks with you, I'm guessing (guessing!) that the welding might cost you $30. If you don't have the reinforcement steel, I think a welding shop could probably supply the reinforcement steel for a lot less than what a tractor dealer would charge (maybe another $10 for a couple of scrap cut-offs).

If you don't already have them, you can find weldable grab hooks by Googling "weldable grab hooks" without the quotation marks, or by going here:
Weldable Grab Hooks at AWDirect

The link to AWDirect was posted previously on TBN, and I ordered hooks from them and was satisfied with the price + shipping and order handling. I wish I could credit the previous poster, but I don't remember who it was.

This dealer is a heavy equipment dealer as well, they have a welding shop.

KC
 

Tractor & Equipment Auctions

3 Row Twin Row Renaldo Planter (A53317)
3 Row Twin Row...
2022 RAM 2500 HEAVY DUTY (A58214)
2022 RAM 2500...
CFG Industry QK16R Mini Excavator (A57149)
CFG Industry QK16R...
2012 TEX MEX TRAILER LOW BOY GOOSENECK (A58214)
2012 TEX MEX...
New/Unused CFG Industrial MX12RX Mini Excavator (A57453)
New/Unused CFG...
UNUSED FUTURE 13' 200 AMP JUMPER CABLES (A58376)
UNUSED FUTURE 13'...
 
Top