Wanted - 15 x 10 rims for Toolcat

   / Wanted - 15 x 10 rims for Toolcat #11  
Last edited:
   / Wanted - 15 x 10 rims for Toolcat
  • Thread Starter
#12  
ruffdog,

Thanks for the links. I'll have to measure the offset and center bore size of my existing wheels. Thanks again.....
 
   / Wanted - 15 x 10 rims for Toolcat #13  
Update needed, please.
 
   / Wanted - 15 x 10 rims for Toolcat
  • Thread Starter
#14  
Xfaxman,

I think I have previously read that you have the 29" tires on your TC. I was wondering if you could look to see how much clearance you have on the inside of the tires when it is in 4WS and the wheel has been turned all the way to one side. I checked mine with the 27" tires that are currently on it and am wondering if the 29" tires will fit. I think everything will be fine except when the steering is turned all the way to one side when it is in 4WS. It might just mean I can't turn the last little bit. I'll just have to decide if that is going to be a problem.
 
   / Wanted - 15 x 10 rims for Toolcat #15  
If my 29" turfs can clear, xfax's R4 tires will have plenty of room.
 
   / Wanted - 15 x 10 rims for Toolcat
  • Thread Starter
#16  
ruffdog...what series TC do you have? Mine is a B-series which has the solid axles. I just don't know if the clearance is the same between the solid axle versions and the independent suspension versions.
 
   / Wanted - 15 x 10 rims for Toolcat #17  
Mine is the G series. I can't answer your clearance question either.
 
   / Wanted - 15 x 10 rims for Toolcat #18  
Mine is a G Series also, so big difference.

Some pictures of the F series:

P1300004.JPG


P7030019.JPG


P7030020m.jpg
 

Tractor & Equipment Auctions

2007 Saturn Sky Convertible Coupe (A55853)
2007 Saturn Sky...
2013 Infiniti M37 Sedan (A55758)
2013 Infiniti M37...
2018 DRAGON ESP 130BBL VACUUM TRAILER (A53843)
2018 DRAGON ESP...
2015 Toyota Prius (A55758)
2015 Toyota Prius...
(4) CAMARO 5 LUG WHEELS & 245/50R16 97H TIRES (A54757)
(4) CAMARO 5 LUG...
CFG Industrial MX15RX (A53316)
CFG Industrial...
 
Top