i'm still getting used to my dk45se, compared to my old tractor. One thing i've noticed is when i'm using the box blade, and only want it part way down, the thing vibrates(for lack of a better description) violently. it won't stop until i lower the blade all the way. same thing, if i raise it slowly and try to stop midway, it does the same thing. what am i doing wrong?
Grading vibration when lowering box blade
- Thread starter stwyatt
- Start date
- Views: 994
Lloyd_E
Veteran Member
- Joined
- Nov 15, 2003
- Messages
- 1,475
- Location
- South Shore Nova Scotia Canada
- Tractor
- 2008 Kioti DK 45 sc
Your using the wrong lever.
Don't use the draft lever... use the other one.
lloyd
Don't use the draft lever... use the other one.
lloyd
PA hayseed
Platinum Member
to control position it can be a little tricky. (when I start my tractor my levers are both all the way down). You have to move the draft lever all the way up, then the position all the way up. Then drop the draft all the way down (the implement will only move a couple of inches and not all the way down). Then you can use the position to control the height.
Once you get the hang of it, it will be easy. I had to actually think about what I do to use it that way. It will become second nature in no time.
Once you get the hang of it, it will be easy. I had to actually think about what I do to use it that way. It will become second nature in no time.
