huckerpaxton
New member
- Joined
- Aug 20, 2011
- Messages
- 1
- Tractor
- kubota b7800
the valve on my loader is blowing out the front on somr type of relief or blow out valve,any one know why?
Loader valve leaking
- Thread starter huckerpaxton
- Start date
- Views: 1248
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
The fluid in the hyd system does not exit anywhere except into the tank. If you see fluid, you have a leak of some kind.
Some relief valves leak out the adjusting cap.
If it is leaking anywhere else, there is something loose, or there is a defect in a hose, a fitting, spool o-rings, or split valve, etc.
Take a pic and point to the area if possible.
Some relief valves leak out the adjusting cap.
If it is leaking anywhere else, there is something loose, or there is a defect in a hose, a fitting, spool o-rings, or split valve, etc.
Take a pic and point to the area if possible.
leonz
Super Member
About your valve body if its gimballed valve set its
time to think about getting new valve body.
If your set up is a 2 spool valve unit you have blown o-rings
and spool seals. If its relatively new valve you can have someone replace the spool seals and O rings; if its an old spool valve its time to scrap it and buy a new one.
time to think about getting new valve body.
If your set up is a 2 spool valve unit you have blown o-rings
and spool seals. If its relatively new valve you can have someone replace the spool seals and O rings; if its an old spool valve its time to scrap it and buy a new one.
