I have 2 valves that are similar to this. Surplus Center - 5 GPM 2 SPOOL CESSNA 31932AE 164754C91 VALVE
Where can I find handle kits for valves like this?
Where can I find handle kits for valves like this?
Valve handles
- Thread starter dodge85rc
- Start date
- Views: 1745
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
If you would state the name of the valves, one could do a better search.
Is it a Cessna valve or some other brand?
Is it a Cessna valve or some other brand?
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Call these people. Maybe they can help.
Repair Hydraulic Control Valves | CAT, Komatsu, Volvo, Press Brake - Control Valve Info
Repair Hydraulic Control Valves | CAT, Komatsu, Volvo, Press Brake - Control Valve Info
Heavy Metal Doctor
Silver Member
- Joined
- Sep 12, 2007
- Messages
- 139
- Location
- Mason Dixon Line
- Tractor
- Kubota L3301 w/LA525 loader, old IH Cub Cadets - 1250, 105, 124, Ferris IS1500z
Looking at that link in the first post, I don't see holes for any bracket to bolt to the valve body - only the hole through the end of the spool. That makes me wonder if the valve are maybe designed to have linkage / handle design determined by the installer.
If there is something already there which you now need to replace / repair, then a picture would help greatly.
If there is something already there which you now need to replace / repair, then a picture would help greatly.
Leejohn
Elite Member
If you can't find any, just make a thin sub plate and put you some tabs on it for the handle. 1/4" X 1" flat stock makes good handles.
