Using my post driver on my Kioti

   / Using my post driver on my Kioti #1  

tpulley

Silver Member
Joined
Oct 28, 2011
Messages
171
Location
Wake Foest NC
Tractor
Kioti DK45SE
Took this video today of putting in trellis posts with post driver and Kioti.

We set about 75 or so today for a total of about 125 to date. Posts are 3-4 inches X 8 ft. blunt ends. I am driving them down 3 feet so 5 feet is above ground.

[ame=http://www.youtube.com/watch?v=zGiex92pbns]POst driver in action1.3GP - YouTube[/ame]
 
   / Using my post driver on my Kioti #3  
Wow...interesting! It seems slow, but if you have to drill a hole then tamp in a post....well you get the idea.
 
   / Using my post driver on my Kioti #4  
Took this video today of putting in trellis posts with post driver and Kioti.

We set about 75 or so today for a total of about 125 to date. Posts are 3-4 inches X 8 ft. blunt ends. I am driving them down 3 feet so 5 feet is above ground.

POst driver in action1.3GP - YouTube

What Kioti you got? What post driver and what would that run $$$?
 
   / Using my post driver on my Kioti
  • Thread Starter
#5  
DK45SE Kioti.

I am not exactly sure what brand of post driver it is. I bought it used. Cost me $800 used. When I get done putting in all my trellis's you can get it at a good price...
 
   / Using my post driver on my Kioti #6  
DK45SE Kioti.

I am not exactly sure what brand of post driver it is. I bought it used. Cost me $800 used. When I get done putting in all my trellis's you can get it at a good price...

Thought that looked about right for either a 40 or 45. I may have to invest in one. Thanks for the info.:thumbsup:
 
   / Using my post driver on my Kioti #7  
And here I fully expected to see them being set with your FEL. :)

Nice rig, I'd pay $800
 
   / Using my post driver on my Kioti #8  
Took this video today of putting in trellis posts with post driver and Kioti.

We set about 75 or so today for a total of about 125 to date. Posts are 3-4 inches X 8 ft. blunt ends. I am driving them down 3 feet so 5 feet is above ground.

[ame=http://www.youtube.com/watch?v=zGiex92pbns]POst driver in action1.3GP - YouTube[/ame]

How would this work on pressure treated 4x4s? How does it do in rocky ground? I live in the Northeast and it's pretty rocky up here. Thanks.
 
   / Using my post driver on my Kioti
  • Thread Starter
#9  
Its supposed to do square posts fine. I haven't tried then yet but will before fall arrives I am pretty sure. As for rocky ground, when the posts hit a rock unless it can move it or break it it stops. I have seen some stuff I was banging in and it only went down 1/4 -1/2 and inch for a couple of inches then started going down again. I would suspect it was the hard pan layer.
 

Tractor & Equipment Auctions

10ft x 8ft Container with Side Door (A51573)
10ft x 8ft...
2019 Caterpillar 299D2 High Flow Compact Track Loader Skid Steer (A51691)
2019 Caterpillar...
2004 INTERNATIONAL 9900I (A52472)
2004 INTERNATIONAL...
McDon 75s 40' Flex Draper Head (A52349)
McDon 75s 40' Flex...
2016 GMC Sierra Pickup Truck, VIN # 1GTN1LEC5GZ901362 (A51572)
2016 GMC Sierra...
New Skid Steer Attachment Plate (A53002)
New Skid Steer...
 
Top