Used My MoJackEZ For The First Time

   / Used My MoJackEZ For The First Time #1  

Bird

Rest in Peace
Joined
Mar 20, 2000
Messages
40,896
Location
Corinth, Texas
We talked about Sears and prices of the MoJack in this thread and now I have the MoJackEZ and used it for the first time today, so thought I'd post a few pictures. Basically, I think it's great, probably a bit expensive for something that will only be used a few times each year, but it's solid and easy to use. I removed the blade, sharpened and balanced it, put it back on, and thoroughly washed the bottom side of the deck. Then I let the mower down, and of course did not use the MoJack while I changed the oil & filter.
 

Attachments

  • DSCN0419 (1426 x 1069).jpg
    DSCN0419 (1426 x 1069).jpg
    596.1 KB · Views: 203
  • DSCN0421 (1426 x 1069).jpg
    DSCN0421 (1426 x 1069).jpg
    512.5 KB · Views: 244
  • DSCN0422 (1426 x 1069).jpg
    DSCN0422 (1426 x 1069).jpg
    560.3 KB · Views: 251
  • DSCN0425 (1426 x 1069).jpg
    DSCN0425 (1426 x 1069).jpg
    510.1 KB · Views: 215
   / Used My MoJackEZ For The First Time #2  
Buying it at Amazon most certainly saved you some money. :thumbsup: Is the lifting mechanism hydraulic?
 
   / Used My MoJackEZ For The First Time
  • Thread Starter
#3  
Buying it at Amazon most certainly saved you some money. :thumbsup: Is the lifting mechanism hydraulic?

The lifting mechanism is just like a screw jack. In the first picture, the light colored vertical piece is the screw. The crank can be mounted in one of two positions, depending on how much leverage you want; i.e., how long that crank and handle are from the top of the screw. Or you can leave it off entirely and use a drill motor to run it up and down. I mounted the crank for the short distance (least amount of leverage) and it was quite easy to crank up and down.
 
   / Used My MoJackEZ For The First Time #4  
The lifting mechanism is just like a screw jack. In the first picture, the light colored vertical piece is the screw. The crank can be mounted in one of two positions, depending on how much leverage you want; i.e., how long that crank and handle are from the top of the screw. Or you can leave it off entirely and use a drill motor to run it up and down. I mounted the crank for the short distance (least amount of leverage) and it was quite easy to crank up and down.
Thanks for the info.
 
   / Used My MoJackEZ For The First Time #5  
Thanks, I was wondering if that might be something worth looking in to...
 
   / Used My MoJackEZ For The First Time #7  
I use a cherry picker (engine hoist) and a chain to lift the front of my zero turn, works well and does more than just lift a mower.
 
   / Used My MoJackEZ For The First Time
  • Thread Starter
#8  
I use a cherry picker (engine hoist) and a chain to lift the front of my zero turn, works well and does more than just lift a mower.

Yep, if I had something like that, or still had a tractor with a front end loader, I wouldn't have bought the MoJack.
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2022 Bobcat E88 Excavator (RIDE AND DRIVE) (A50774)
2022 Bobcat E88...
2004 30ft S/A Scissor Pontoon Boat Trailer (A50324)
2004 30ft S/A...
2014 Wabash Tanker Trailer (A50774)
2014 Wabash Tanker...
Online Buyers Premium (A47384)
Online Buyers...
Sullair RD3800 Compressed Air Dryer (A47384)
Sullair RD3800...
 
Top