Tx1300 injector nozzle

[marcelPL]

It looks like one of my injectors on tx1300 gave up.

From what I found, all I can buy is a separate injector nozzle. But it looks like it's only a small part of the injector.

Is there a way to separate the nozzle from the injector? To me this looks like one solid piece of steel...

I can find something here:

https://traktor60.hu/japanese-tractor-parts/2341_search/2375_injection-nozzle-iseki-tx-series

Any help is appreciated

 

[TractorTech]

Mitsubishi KE70 injector.

Looks like Southern Global has an exchange injector service - Injector Assembly - IA-MT401R

Also an older link on TBN for the same subject: Mitsubishi KE70 Injectors

 

[thepumpguysc]

Hold the top of the injector in a vise, watch the threads.
Now use the flats on the injector to loosen it..(3/4”.?)
Tighten it back to 50-55 ftlbs w a new nozzle..

 

[thepumpguysc]

Go ahead and take it apart & get the number off the nozzle..& look it up on Google-Who..

 

[chrismac]

Hi Marcel, I bit late with my reply, good to see your still using your tractors

DSC02642 by chrismac2012, on Flickr

I pulled mine apart and got the nozzles replaced, they need set up with shims to pop at the correct pressure, I dont think they guy who did mine made a very good job of setting mine. The part number I had was Injector DN4SD24

All the best.
Chris