TU Series - External Hydraulics

[Chris_in_Oz]

OK, I found it!

Under the left-hand engine side cover.

 

[Chris_in_Oz]

A closeup view - The big pipe is the low-pressure return and the small pipe underneath is the high-pressure feed - Correct?

NOW I'm getting somewhere.....

/forums/images/graemlins/cool.gif

 

[Chris_in_Oz]

A closeup view - The big pipe is the low-pressure return and the small pipe underneath is the high-pressure feed - Correct?

NOW I'm getting somewhere.....

/forums/images/graemlins/cool.gif

 

[kayssupply]

There you go. Now you can trace that line to place that is easy to cut and put in your adapters. I have seen compression adapters and weld on adapters. The weld on were actually threaded plugs drilled out to fit over the pipe and then welded / brazed.

 

[kayssupply]

There you go. Now you can trace that line to place that is easy to cut and put in your adapters. I have seen compression adapters and weld on adapters. The weld on were actually threaded plugs drilled out to fit over the pipe and then welded / brazed.

 

[formica]

Hi,Chris! I've got the TU155F too and have the same wish to add connectors to standard hydraulic system,could You share Your experience,how did You do that,with pictures?

 

[FFN]

Hi did anyone ever get this solved? How did you get on with adding ports? cheers