the tiller tines quit turning. the wheels still turn. so this seems to be a stripped gear problem on the tine shaft. anyone ever fix this? looking for tips and tricks to make this go smoothly and for me to end up a happy tiller user.
troybilt super bronco
- Thread starter randy41
- Start date
- Views: 1537
RandyT
Elite Member
could be a sheared key in the bronze tiller shaft gear, or could be the teeth on the gear are broken. May even have to replace the shaft that runs the gear. Before removing the tine shaft check to see if there is wiggle in the shaft. If so then you will also need to replace the tapered roller bearings while you at it. if the seals have cut in the shaft then will also need to replace the shaft due to that is where the rubber part of the seal runs. have replaced several over the last several years in the shop.
