Troy built Horse problem

   / Troy built Horse problem #1  

DeNiro

Member
Joined
Dec 5, 2007
Messages
42
Location
Raleigh, NC
Tractor
Kioti KL3054 / Iseki TL2100
I just noticed the belt pulleys on the front of transmission will move in and out about 1/4". I was changing belt positions when I noticed it. What is the problem and it is easily fixed?
This is the four speed model.
 
   / Troy built Horse problem #2  
They all move. I think for alignment purposes. Not a problem.
 
   / Troy built Horse problem #3  
Just got a used Horse myself. Read through the manual and that movement is normal. It allows for shifting between Fwd and Rev and between the Hi and Low gear by sliding the belt over. Unless the belt is stretched too much, then it might need to be replaced. You can also adjust the tension. Might want to check the manual for that.
 

Tractor & Equipment Auctions

12in Digging Tooth Bucket Excavator Attachment (A55787)
12in Digging Tooth...
2025 Kivel Forks and Frame Mini Skid Steer Attachment (A55787)
2025 Kivel Forks...
2019 TIGERCAT 234B TANDEM AXLE DE LIMBER (A54607)
2019 TIGERCAT 234B...
2018 PINSA 130BBL VACUUM TRAILER (A53843)
2018 PINSA 130BBL...
UNUSED WOLVERINE GB-11-72W 72" HYD GRAPPLE BUCKET (A54757)
UNUSED WOLVERINE...
Tiger Mower Hydraulic Tank Connection (A51691)
Tiger Mower...
 
Top