Traction Tree pulling traction: loaded tires or ballast?

   / Tree pulling traction: loaded tires or ballast? #31  
No matter what you do, its worth it to load the rear tires, especially R4's. Before I got my hoe, I used to try and dig around the bsae a bit with the FEL, then push or pull. I did find that hooking the chain to the 3pth and putting a bit of lift to it sometimes helped. DON'T try this unless you have HST and can control the tension with precission.
I've also pulled stubborn root systems by using the 4x4 and a HEAVY (one inch) nylon rope that will stretch with a running start, popping the root ball into the air. This requires a SOLID hitch point on the vehicle and at least 20' of rope. This system will exert more force on the tree than you will achieve with an 8000lb winch, but DON'T use any chain that you might break when hooking to the tree.
 

Tractor & Equipment Auctions

2015 GENIE Z-62/40 TELESCOPIC/SCISSORING BOOM LIFT (A52709)
2015 GENIE Z-62/40...
2020 Deere 50G (A53317)
2020 Deere 50G...
2022 Ford F-250 XL 4x4 Ext. Cab Pickup Truck (A55973)
2022 Ford F-250 XL...
2016 AutoHauler CX11HCSD T/A Car Hauler Trailer (A56857)
2016 AutoHauler...
2001 Dorsey 48ft Flatbed T/A Trailer (A56857)
2001 Dorsey 48ft...
2013 John Deere 27D Mini Excavator (A55973)
2013 John Deere...
 
Top