Transmission

   / Transmission #1  

Msmith6365

New member
Joined
Jun 14, 2022
Messages
1
Tractor
2000 New Holland TN65
I just bought a 2000 New Holland TN65 Tractor. The person I bought It from loaded it on the trailer. The problem I am having is I can't get it to go into gear. It's a 8x8 shuttle transmission. Can someone help me with this?
 
   / Transmission #2  
What part of the trans won't go into gear? There is the range selector (which needs to be "in gear", either A or B) , then there is the speed (gear) selector (usually 1-2-3-4) , then there is the shuttle shift lever (either F-N-R). If any of theses are not "in gear", the tractor won't move.

Hopes this helps you out.
 
   / Transmission #3  
Contact the person you bought it from, as he is probably the most familiar with your tractor.
 
   / Transmission #4  
Welcome to TBN
I suggest if you haven't already performed this task for you to acquire/read your tractors operators manual. There's normally a wealth of important information in operators manual including correct operation.
 
   / Transmission #5  
Welcome to TBN
Are the shift levers all moving freely or is one "stuck"? Does it feel like it is shifting okay but simply does not move when you let out the clutch?
 

Tractor & Equipment Auctions

EZ-GO MPT 1000 Electric Utility Cart (A51694)
EZ-GO MPT 1000...
1981 FMC Link Belt Crane (A50120)
1981 FMC Link Belt...
CFG Industrial QK20R (A50121)
CFG Industrial...
2000 HEIL TRAILER INTERNATIONAL FUEL TRANSPORT TRAILER (A52472)
2000 HEIL TRAILER...
New LS170 Skidloader (RUNS) (A50774)
New LS170...
Ran during check in. No longer running. (A51694)
Ran during check...
 
Top