I have a 2015 that just rolled to 200 hrs today. I was running it pretty hard moving manure up and down some really steep hills. It ran fine until the end of the day. It has the HST transmission. I tried shifting from low range to high and I could not make the shift. The high range gears were already spinning and wouldn't let the shifter engage. Thinking that the pedal may have been the culprit, I moved it up and down but it didn't change. I depressed the clutch but it didn't help either. When I let the clutch out, the mid-PTO was engaged but the lever was still in the neutral position. It will shift in and out of low range normally and moves fine in low. Any ideas?..
Tranny problem
- Thread starter Dbellrn
- Start date
- Views: 933
AchingBack
Elite Member
Lower your RPM, try to be on level ground, briefly tap your forward reverse pedal while trying to shift. This always works for me. Also, at 200 hrs., make sure all of your linkages are thoroughly lubricated.
