Trailer Ramps ............

   / Trailer Ramps ............ #31  
ditto that. mke good wheel chocks or drive over jacks in an emergency. all sorts of good uses for an otherwise piece of scrap timber. I like the price too!

and few people steal them!

soundguy

Yep, I carry a few myself. 2x8, 4x4, and 6x6. Too handy to not have around.

Chris
 
   / Trailer Ramps ............ #32  
ditto that. lots of uses. places to drop a trailer foot.. etc..

soundguy
 
   / Trailer Ramps ............ #33  
I had the problem with blocking the tailights on my car/equipment trailer. I used the jacks that attach to a pipe post with a pin...I simply welded additional posts to the tongue where the jacks reside out of the way horizontally when not actually using them on the rear.
These-

Sneaky. I like it!:thumbsup:
 
   / Trailer Ramps ............ #34  
Here I am, over a year after the last poster, but it seems to be the place to post this question.

I have a two-axle 10K car hauler trailer that is missing its ramps. The storage will allow two 7 ft long 4 X 12s.

I would probably nail and glue together eight 2 X 4s to make stronger, less split-prone boards.

The ramps are needed soon to move a car, but want them to support a tractor in the future. Probably a 25 to 35 hp diesel compact with a front loader and a Gannon.

Would these be strong enough to support such a tractor?

Or should I use Glulam? I know it is stronger, but not how much stronger.
 
   / Trailer Ramps ............ #35  
wood? never would I try but in an emergency.

i'd go with heavy angle on angle
 
   / Trailer Ramps ............ #36  
Have some welded up. I would not trust wood ramps.

Chris
 
   / Trailer Ramps ............
  • Thread Starter
#38  
Since this thread has been drug up I'd like to add I still have not purchased any ramps to load my tractor into my dump trailer. One of these days I will buy some though. I did end up making a pair of ramps out of some steel that I had hanging around. I used 2" square tubing with some small angle welded across 'ladder' style, every 6". Boy they are heavy though. :mad:
 
   / Trailer Ramps ............ #39  
I still love the alum ramps from discount ramps.com They cost me the same as steel ramps would have and are sooo much lighter and easier to handle. Plus no rust and they also seem sturdier than the bent up ramps that came with the trailer. They have a bunch of styles, so probably something that would work. Wood is only good for loading light stuff - a few hundred pounds at most.
 
   / Trailer Ramps ............ #40  
Wood ramps make better movies:

 

Tractor & Equipment Auctions

4 1/2 150G DRILL STEM 358 JOINTS (A50854)
4 1/2 150G DRILL...
2000 ADDCO DH1000 Message board (A49461)
2000 ADDCO DH1000...
2015 KUBOTA 1140CRX RTV (A51406)
2015 KUBOTA...
Ditch Witch 6510A Trencher - Deutz Diesel, Backhoe, Cable Plow, Front Blade (A51039)
Ditch Witch 6510A...
POWER BNG2800IE INVERTER GENERATOR (A50854)
POWER BNG2800IE...
2013 Toyota Prius Hatchback (A50324)
2013 Toyota Prius...
 
Top