3-Point Hitch top link hydraulics

[terry2shot]

I want to install a hydraulic top link on my 2350 3 pt. Can somebody supply a pic or illustration as to where I can tap into the hydarulic system?

 

[Brandon1107]

If you do a search you will find a wealth of information. I have ordered an HTL for mine hopefully it will be in soon sounds like a great addition to any tractor.

Good Luck

 

[CHDinCT]

The best solution in my opinion is to spring for the Kubota dual rear remote kit for your BX. Cost me a little over $300 about a year and a half ago. This includes the valve, levers, pipes, brackets and female quick connects. Pretty slick set up if you ask me. You can then source your top link from wherever you want.

Here's a good thread to read up on it, including pics

http://www.tractorbynet.com/forums/kubota-owning-operating/125660-bx7326-rear-aux-kit-install.html

 

[jgrreed]

The best solution in my opinion is to spring for the Kubota dual rear remote kit for your BX. Cost me a little over $300 about a year and a half ago. This includes the valve, levers, pipes, brackets and female quick connects. Pretty slick set up if you ask me. You can then source your top link from wherever you want.

Here's a good thread to read up on it, including pics

http://www.tractorbynet.com/forums/kubota-owning-operating/125660-bx7326-rear-aux-kit-install.html

Agreed. 300$ is a good deal, and I assume that since it's a Kubota kit it'll bolt right on.

-Jer.

 

[terry2shot]

I work in a facility with a VERY large hydraulic department. I will "source" my own componants. I was just looking for the supply and return ports.

 

[teg]

It was in my manual... I have a L2800, not sure about yours but have you checked your manual for the location of it?

 

[terry2shot]

Ooopps...guy thing, directions are the last thing:laughing:

 

[teg]

I live three hours away from my tractor so I have to sleep with the manual under my pillow :cloud9:

PS. I won't tell the other guys, if you don't...

 

[jgrreed]

I work in a facility with a VERY large hydraulic department. I will "source" my own components. I was just looking for the supply and return ports.

Wanna "source" me some too?? :licking:

-Jer.

 

[terry2shot]

I checked the manual and the ports that it shows are consumed by the FEL. Can I just "tee" those?