Hey guys, I have the Bobcat CT235 with the 68 inch bucket. I am in NJ but keep the tractor in NY and won't be up for a few weeks. Can anyone with the 68 inch bucket help me with the bucket inside measurement. Need that info to order bolt on tooth bar for my bucket. I am assuming 67 1/2 or 3/4 but want to be sure. Thanks guys!
Tooth Bar for 68" Bucket
- Thread starter tonydn6
- Start date
- Views: 7174
SSdoxie
Elite Member
Mines CT225 w/same loader. Bucket is 67 1/4" inside. That's at the actual boucket material where you have to drill through the sides.
Note: this is on the first version loader (Rhino built) not the model year 11 that came out last Fall (Bobcat built).
bullbreaker
Elite Member
You didn't ask but if I were you I'd go with a minimum of 7 teeth and probably 8,for that width.
Boone
Pic is 64 1/2 " inside (7 teeth).
Attachments
milkman636
Veteran Member
- Joined
- Aug 15, 2010
- Messages
- 1,482
- Location
- Palm of the Right Hand
- Tractor
- Bobcat CT335 + John Deere 1023e (former owner of Kubota BX2370-1, John Deere 5210, and Ford 2000)
The Bobcat dealer had a set of 7 bolt-on teeth with hardware for under $90 for the 68" bucket on my CT335. They fit nicely into the predrilled holes, and installation took about 15 minutes.
NOTV8
Silver Member
- Joined
- Apr 30, 2010
- Messages
- 235
- Tractor
- CT235
Can you ask if they have extra one to ship?:drool:
Canada_CT230
Platinum Member
I was looking for teeth to bolt on to the existing holes in the 68" bucket. My dealer didn't think they had anything. Do you have a part number?
milkman636
Veteran Member
- Joined
- Aug 15, 2010
- Messages
- 1,482
- Location
- Palm of the Right Hand
- Tractor
- Bobcat CT335 + John Deere 1023e (former owner of Kubota BX2370-1, John Deere 5210, and Ford 2000)
The sales slip lists item # 6728247. The number 0727455 is cast into the top of each tooth right above the Bobcat name. The kit included 7 teeth and 14 bolts with nuts.