Insurance Toolboxes and cup holder

[winston1]

For anyone who might be interested or have one to post. Here are my toolboxes and cup holder. Had someone wanting pictures but not smart enough to attach them to a private message.

 

[lancem]

Nice cup holder!

 

[stormpetrel]

I love the head rest!!:thumbsup:

 

[shawnjvl]

Thanks Winston. I really the Alum. box on the left fender? Did you make that too?.:thumbsup:

 

[shawnjvl]

I also picked up a brace on pic#5, under seat that attaches from the rgt to the lft fenders. My 2000 needs that because the fender always vibrate at certain times with 2cyl.

 

[silvertramp]

I use a plastic Folgers coffee can tie wired to the fender grab rail for a can holder. 1st class all the way for me

 

[normde2001]

For anyone who might be interested or have one to post. Here are my toolboxes and cup holder. Had someone wanting pictures but not smart enough to attach them to a private message.

I don't need all those tool boxes, but how's that cup holder working out for you? I've been trying to come up with something like that, without drilling into the fender.

 

[Car Doc]

Here is the cup holder I built I cant find one of my tool box I will look around for it.

 

[YannyMan]

This is the cup holder that was on my YM #2 when I bought it. Butt ugly, but I'm leaving it because its better than nothing and I don't have to do a **** thing to it but put a drink in it!


And yes, I removed that monstrosity of a seat as the previous owner was a huge galloot of 6'4" at least and I'm of the tree stump 5'7" variety.

 

[winston1]

Thanks Winston. I really the Alum. box on the left fender? Did you make that too?.:thumbsup:

That is actually a SS box but no I didn't make it. It was on an old Ford Jubilee that I owned a few years ago.

 

[winston1]

I don't need all those tool boxes, but how's that cup holder working out for you? I've been trying to come up with something like that, without drilling into the fender.

Cup holder works fine, but it is attached through the fender.

 

[normde2001]

Cup holder works fine, but it is attached through the fender.

I would like to find/make something that will hold a coffee mug and attach to the hand rail.

 

[clemsonfor]

I would like to find/make something that will hold a coffee mug and attach to the hand rail.

Look in boating stores. Like West marine and or overtons online stores. They have many things that clamp to rails for boats. MOstare for the 3/4 or 1" size rail if i remembe right, i think 7/8" is a popular size. If i remember right our rails are smaller than that, but maybe not. Id look at what they have they may have a clamp on drink holder or you can buy clamps, if they are too big of a rail size you can fabricate bushings for it so that it tightens down.

 

[clemsonfor]

Cup holder works fine, but it is attached through the fender.

Was going to say that then i fliped the page and saw that you did.