Ritothebull
Gold Member
- Joined
- May 5, 2018
- Messages
- 367
- Location
- Brooksville, Florida
- Tractor
- Massey 461 Massey 165 . KTM SDGT
Started to do a bumper tuck on the Ranchero to do away with all the funky looking 5 mph junk.
Todays shop time.
- Thread starter 4570Man
- Start date
- Views: 282142
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 7,047
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
I receiver mounted two Roper Whitney punches today.
And the guys on Welding Web convinced me to finally make these “clamps” to enable cutting short pieces of stock in the power hack saw and horizontal bandsaws.
Adding the little handles made them easier to use.
And the guys on Welding Web convinced me to finally make these “clamps” to enable cutting short pieces of stock in the power hack saw and horizontal bandsaws.
Adding the little handles made them easier to use.
Last edited:
Kyle_in_Tex
Super Star Member
Big Barn, I see that nice round chunk of 316. How long would it take the power hacksaw to get through it?
Nice punches, I'd love to have an iron worker.....
Nice punches, I'd love to have an iron worker.....
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 7,047
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
Slow go’in, Kyle. I’ve never timed it but more than 5min.
And YES. Iron worker is the way to go.
Kyle_in_Tex
Super Star Member
Your shop is so clean and organized. My compliments.
kevinwak
Platinum Member
Worked on my outdoor shower today. Good for rinsing off after a day in the garden or at the beach. I just need to install the foot sprayer and find/make a hooped curtain rod for the shower curtain. 
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 7,047
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
kevinwak
Platinum Member
Modesty is overrated.
Nice job though. I like it!
It will have a shower curtain eventually.
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 14,548
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Sure beats turning the hose on yourself. Looks great!
kevinwak
Platinum Member
boys trying it out after a hot evening at the lake.
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 7,047
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
daugen
Epic Contributor
funny I just don't associate Northern Alberta with hot days at the lake and outside showers. Now at the NJ shore...
Kevin, nice job on that. Are you going to clear varnish it? (or perhaps you already did)
Kevin, nice job on that. Are you going to clear varnish it? (or perhaps you already did)
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 14,548
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
And what are the two small holes under the faucet? Outlet for foot wash?
kevinwak
Platinum Member
The upper of the two holes is the valve to turn on the foot sprayer. Hard to see but there is a metal 1/4 turn valve handle. Lower one is for the foot sprayer.
I do want to do a finish to keep the wood from graying, just haven’t yet as I don’t know what to use and have enjoyed the smell of warm water on the cedar.
Our summers are warm here, just very short. The last two months most days were over 25 Celsius on average and the day I built this was 35 Celsius (96 F). The weather is great for two months and we make the most of it. Most projects outdoors get pushed to fall and spring as to not waste the bit of great weather working around the yard.
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 7,047
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
I finished building this stand for my Baldor buffer.
It was a bit of a drawn out project utilizing scrapped pallet jack forks for the uprights. In the end the only thing I had to buy was paint.
It was a bit of a drawn out project utilizing scrapped pallet jack forks for the uprights. In the end the only thing I had to buy was paint.
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 14,548
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Very nice and some style points too! I would love to happen upon a Baldor buffer like yours, to go along with my Baldor grinder. What a smooth and quiet running motor!
Kyle_in_Tex
Super Star Member
Nice job Big Barn.
Einthewoods
Platinum Member
Picked up a couple more LED shop lights from Costco and a new fire extinguisher for the barn.
I bought a couple of them a few months ago and love them. $19 or $20 and a good bright light.
I'll get the lights hung under my loft and the fire extinguisher tomorrow. And since I'll be in the barn, I'll probably check to be sure the mini-fridge is keeping the beer cold.
Such hardships in life. How do I continue this horror.
I bought a couple of them a few months ago and love them. $19 or $20 and a good bright light.
I'll get the lights hung under my loft and the fire extinguisher tomorrow. And since I'll be in the barn, I'll probably check to be sure the mini-fridge is keeping the beer cold.
Such hardships in life. How do I continue this horror.
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 14,548
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
I recently bought four more of the Costco LEDs even though I don't have a spot for them yet. My garage shop is well lit now with them. I also bought a the new 'larger' fire extinguisher and replaced an old smaller one.
Oh, and thanks for the reminder, I just checked my mini fridge in my shop and yep... the beer is cold!
daugen
Epic Contributor
I just checked my mini fridge in my shop and yep... the beer is cold!
yup, same here. :thumbsup: though I'm usually going in the enclosed woodshop in my barn looking for a sports drink
in the heat of the day. Little portable a/c in woodshop takes the worst of the heat off but won't get below 80 on a 100 degree day.
Rains so much here I run the a/c regularly just to prevent mold. I have a chair in there equidistant from a big fan and the a/c output,
I call it my aahhh chair. Tired, sopping wet, I sit in that chair and drink a no calorie sports drink and get my body temp down.
Though usually the shirt comes off, a/c and wet clothes sure don't mix.
Big Barn, that deserves a first prize wow...
yup, same here. :thumbsup: though I'm usually going in the enclosed woodshop in my barn looking for a sports drink
in the heat of the day. Little portable a/c in woodshop takes the worst of the heat off but won't get below 80 on a 100 degree day.
Rains so much here I run the a/c regularly just to prevent mold. I have a chair in there equidistant from a big fan and the a/c output,
I call it my aahhh chair. Tired, sopping wet, I sit in that chair and drink a no calorie sports drink and get my body temp down.
Though usually the shirt comes off, a/c and wet clothes sure don't mix.
Big Barn, that deserves a first prize wow...
