TODAYS SEAT TIME

   / TODAYS SEAT TIME #3,221  
Nice pictures terryknight! :)
 
   / TODAYS SEAT TIME #3,222  
Terry: Thanks for the pictures... nice looking place you have there. I'm jelous of all the flat ground, as I/we have none. My wife would like your board fences, she dreams of them around our horse fields.
 
   / TODAYS SEAT TIME #3,223  
019.jpg

This is from the other day. The dog always likes it when I cut her yard. She gets to run free for a little while.

Larro
 
   / TODAYS SEAT TIME #3,224  
Nice pictures terryknight! :)

thanks

Terry: Thanks for the pictures... nice looking place you have there. I'm jelous of all the flat ground, as I/we have none. My wife would like your board fences, she dreams of them around our horse fields.

thanks greg, i wish i could say it was my property, but alas, it's not. it is a family friends estate, i try and help out as much as a i can and then i can spend most of the hunting season there.

i will give you falt ground i think there is a total gain of 32 ft in elevation in the county, makes for some very poor sledding
 
   / TODAYS SEAT TIME #3,225  
finished moving the dirt pile. then did some driveway maintenance, three 10 yard (i'm guessing) dump truck loads of gravel.







 
   / TODAYS SEAT TIME #3,226  
finished moving the dirt pile. then did some driveway maintenance, three 10 yard (i'm guessing) dump truck loads of gravel.







 
   / TODAYS SEAT TIME #3,227  
Nice job Terry. Looks very nice. I can't wait for some dry ground to work on like you have there. Then I can go back to work instead of dubbing around.
I finished my little hitch for the wood splitter today.
 

Attachments

  • ReeseHitch5.JPG
    ReeseHitch5.JPG
    886.9 KB · Views: 232
  • ReeseHitch7.JPG
    ReeseHitch7.JPG
    876.1 KB · Views: 303
   / TODAYS SEAT TIME #3,228  
That does look pretty smooth, Terry,:thumbsup:
Did you just use the back blade, reversed", to spread that?
How did you get it so even.
 
   / TODAYS SEAT TIME #3,229  
That does look pretty smooth, Terry,:thumbsup:
Did you just use the back blade, reversed", to spread that?
How did you get it so even.

the truck driver did most of the work. sat afternoon scraped the driveway in preparation, monday morning the driver set the tailgate and idled along leaving a nice smooth run of gravel. when he got to the parking area it became a littler thicker and he also left two small piles to be spread by me. took the blade reversed and spread it around and then thinned out the areas with too much gravel, then took the rake knocked down the ridges you get using the blade. and finally took a hand rake for the few areas that needed fine tuning
 
   / TODAYS SEAT TIME #3,230  
That does look pretty smooth, Terry,:thumbsup:
Did you just use the back blade, reversed", to spread that?
How did you get it so even.

the truck driver did most of the work. sat afternoon scraped the driveway in preparation, monday morning the driver set the tailgate and idled along leaving a nice smooth run of gravel. when he got to the parking area it became a littler thicker and he also left two small piles to be spread by me. took the blade reversed and spread it around and then thinned out the areas with too much gravel, then took the rake knocked down the ridges you get using the blade. and finally took a hand rake for the few areas that needed fine tuning
 

Tractor & Equipment Auctions

2017 Ford F-450 Crew Cab Mason Dump Truck (A50323)
2017 Ford F-450...
2014 VOLVO VNM DAY CAB (A51222)
2014 VOLVO VNM DAY...
2002 International 4400 SBA 4x2 Flatbed Truck (A49461)
2002 International...
2011 INTERNATIONAL PROSTAR PREMIUM DAY CAB ROAD TR (A51243)
2011 INTERNATIONAL...
2022 BARFORD TR8036 MOBILE SCREEN (A51242)
2022 BARFORD...
2015 John Deere 35G Mini Excavator (A49461)
2015 John Deere...
 
Top