TODAYS SEAT TIME

   / TODAYS SEAT TIME #3,221  
Nice pictures terryknight! :)
 
   / TODAYS SEAT TIME #3,222  
Terry: Thanks for the pictures... nice looking place you have there. I'm jelous of all the flat ground, as I/we have none. My wife would like your board fences, she dreams of them around our horse fields.
 
   / TODAYS SEAT TIME #3,223  
019.jpg

This is from the other day. The dog always likes it when I cut her yard. She gets to run free for a little while.

Larro
 
   / TODAYS SEAT TIME #3,224  
Nice pictures terryknight! :)

thanks

Terry: Thanks for the pictures... nice looking place you have there. I'm jelous of all the flat ground, as I/we have none. My wife would like your board fences, she dreams of them around our horse fields.

thanks greg, i wish i could say it was my property, but alas, it's not. it is a family friends estate, i try and help out as much as a i can and then i can spend most of the hunting season there.

i will give you falt ground i think there is a total gain of 32 ft in elevation in the county, makes for some very poor sledding
 
   / TODAYS SEAT TIME #3,225  
finished moving the dirt pile. then did some driveway maintenance, three 10 yard (i'm guessing) dump truck loads of gravel.







 
   / TODAYS SEAT TIME #3,226  
finished moving the dirt pile. then did some driveway maintenance, three 10 yard (i'm guessing) dump truck loads of gravel.







 
   / TODAYS SEAT TIME #3,227  
Nice job Terry. Looks very nice. I can't wait for some dry ground to work on like you have there. Then I can go back to work instead of dubbing around.
I finished my little hitch for the wood splitter today.
 

Attachments

  • ReeseHitch5.JPG
    ReeseHitch5.JPG
    886.9 KB · Views: 230
  • ReeseHitch7.JPG
    ReeseHitch7.JPG
    876.1 KB · Views: 303
   / TODAYS SEAT TIME #3,228  
That does look pretty smooth, Terry,:thumbsup:
Did you just use the back blade, reversed", to spread that?
How did you get it so even.
 
   / TODAYS SEAT TIME #3,229  
That does look pretty smooth, Terry,:thumbsup:
Did you just use the back blade, reversed", to spread that?
How did you get it so even.

the truck driver did most of the work. sat afternoon scraped the driveway in preparation, monday morning the driver set the tailgate and idled along leaving a nice smooth run of gravel. when he got to the parking area it became a littler thicker and he also left two small piles to be spread by me. took the blade reversed and spread it around and then thinned out the areas with too much gravel, then took the rake knocked down the ridges you get using the blade. and finally took a hand rake for the few areas that needed fine tuning
 
   / TODAYS SEAT TIME #3,230  
That does look pretty smooth, Terry,:thumbsup:
Did you just use the back blade, reversed", to spread that?
How did you get it so even.

the truck driver did most of the work. sat afternoon scraped the driveway in preparation, monday morning the driver set the tailgate and idled along leaving a nice smooth run of gravel. when he got to the parking area it became a littler thicker and he also left two small piles to be spread by me. took the blade reversed and spread it around and then thinned out the areas with too much gravel, then took the rake knocked down the ridges you get using the blade. and finally took a hand rake for the few areas that needed fine tuning
 

Tractor & Equipment Auctions

Goosen Versa-Vac Turf Vacuum Tractor Attachment (A49346)
Goosen Versa-Vac...
2015 FREIGHTLINER M2 24FT REEFER BOX TRUCK (A50046)
2015 FREIGHTLINER...
Pair of Tractor Tires on Rims (A47164)
Pair of Tractor...
2018 Generac MLT6SM-STD3 6kW Towable Light Tower (A49461)
2018 Generac...
2012 Ford F-350 Mechanics Service Truck (A48081)
2012 Ford F-350...
2012 Ford F-350 Omaha Service Truck (A48081)
2012 Ford F-350...
 
Top