tn85 4 point

[sammyd]

Been messing with this for a while and am at a loss. Have 3 point forkd to move round bales. When I had them on my IH they worked great went all the way down and rested flat on the ground. Now on my NH they won't come close to the ground no matter what I do with the 3 point levers. Manual isn't any help either. Any ideas?
Tia...

 

[LouNY]

Do your side lift arms have different holes to attach to the main lift arms,
how much can you lengthen the lift arms,
Are the swaybars limiting travel.

 

[fishheadbob]

Do your side lift arms have different holes to attach to the main lift arms,
how much can you lengthen the lift arms,
Are the swaybars limiting travel.

Don't forget to lengthen the top link too.

 

[RickB]

Unpin and lengthen the left hand lift link. Lengthen the right hand line using the crank handle. Lengthen the top link to level the forks.

 

[Xfaxman]

Drill holes up higher on the fork frame and move the pins up.

 

[MiserableOldFart]

Could it be you need a longer top link? I use two different sizes on my little machine, depending on implement.