Throttle vibrating back to idle

[AFChief]

Hey gang! My Bx2360 throttle vibs back to idle while I'm mowing with the 60 inch MMM. I'm still under 50 hours so I'm mowing at about 2500rpm. Anyone else have this issue?

 

[Old Retired Cop]

I had the issue with my L3400. There is a couple of lock nuts at the bottom of the throttle rod to tighten.

 

[kcender]

Had the exact same thing happen to my BX2360 at about 10 hours.I got it fixed under warranty but it was a simple matter of tightening the two nuts on the end of the throttle shaft.

 

[AFChief]

Thanks guys. I will check that out.

 

[Goosen1]

A little drop of loctite does the trick.. I had the same thing happen to me.

 

[radioman]

A little drop of loctite does the trick.. I had the same thing happen to me.

hope you referring to the cable clamp.:thumbsup:

I concur, just need to tighten down the cable clamp.

 

[oldballs]

:thumbsup:Just happened to my BX2660 at 200 hrs....but thanks to you all, I already know what to do.