Thoughts on Cold Starting...

/ Thoughts on Cold Starting... #1  

rmonio

Platinum Member
Joined
Aug 4, 2002
Messages
734
Location
New Market, MN
Tractor
JD 4600, JD B
/ Thoughts on Cold Starting... #2  
In the old days we got gasoline tractors which handled the cold better. We used lots of ether. we got a 5 gallon bucket of hot water, set it under the oil pan & put a tarp over the hood to make a mini tent & waited 30 minutes. We pulled the gas tractors if we got any one started. We drained the oil every time we parked it, & put warm oil in every time we wanted to start it. For a diesel you can light a fire with a rag or a propane torch & direct the heat into the aircleaner & crank the engine over - this is dangerous but you asked what farmers did/do.

As a fellow Minnesotian with 6 tractors & 5-6 other motor machines, I make sure the machine runs every 4 weeks or the battery is stored in the basement or a charger is put on the battery every 3-4 weeks. I keep the machines in unheated sheds (a month ago when it hit 0 outside, my bigger diesel started right up the next day on summer fuel & summer oil - the shed kept the tractor about 30 degrees for that extra day or two). I try to plug them in, water heater only, when it is below 20 degrees.

Best prep is to change the fuel filter in fall; use a winter grade of oil; use #1 diesel blended 50/50 with #2 plus a bit of fuel additive for cold weather; change the fuel filter in fall; keep the tractor in a shed that will add 5-10 degrees even without heat; have a way to heat it up, electric plug in or a torpedo heater (see the shed helps); make sure your battery & electrical system is in good shape & charge it if your tractor sets more than 7 days in the cold; and change the fuel filter in fall.

In emergency, use a bucket of hot water, direct a hair drier into the air intake, etc. You often only are 5-10 degrees away from getting the starter to spin fast enough (cold oil drag) and adding 100 degrees of heat to the air intake will make a WORLD of difference on the ignition.

Ether is really bad for diesel engines, and can wreck the manifold (explosive shrapnel) with many preheaters but ifyour tractor allows it & you know the issues it can be a neccesary evil for cold starts.

--->Paul
 
/ Thoughts on Cold Starting...
  • Thread Starter
#3  
Thanks for the feedback, Paul. Fortunately I'm blessed with a poleshed, heaters, and the ability to plug it in before-hand. But I've always wondered what Farmers did years ago - thanks for sharing. We do have it pretty easy these days.

-Bob
 

Marketplace Items

2016 Volvo VNL T/A Sleeper Cab Truck Tractor (A64556)
2016 Volvo VNL T/A...
2017 VERMEER TG7000 TUB GRINDER (A66091)
2017 VERMEER...
2017 Ford Fusion SE Sedan (A64557)
2017 Ford Fusion...
INDUSTRIAS AMERICA 2426 - 10' OFFSET DISC HARROW (A64277)
INDUSTRIAS AMERICA...
Texaco Gas Pump Yard Art (A64557)
Texaco Gas Pump...
2015 International PayStar 5900i 24ft. Flatbed Truck (A64194)
2015 International...
 
Top