Thought for the day, tiller/flail

   / Thought for the day, tiller/flail #1  

Hookblock

Silver Member
Joined
Nov 22, 2007
Messages
197
Location
WI
Tractor
JD 4310
I am looking a getting a tiller, a used one, any make about 5'. And I want to get a flail mower. So my thought is, can I, or has anybody re-geared a tiller to speed it up to be used as a flail mower? And replacing the tiller tines with flail blades.
 
   / Thought for the day, tiller/flail #2  
I have run 5.5' tillers right through a cornfield in the fall. Seriously, I was eye high in cornstalks and the tiller chops the stalks and all and then stirs them into the ground. So it was a bit like mowing if your intention is to make the vegetation go away. To just cut it then you'll not get there with a tiller. Too slow. You'll just end up with the vegetation wrapped around the tines.
 
   / Thought for the day, tiller/flail
  • Thread Starter
#3  
Or how about slowing down a flail mower to be used as a tiller??
 
 

Tractor & Equipment Auctions

1263 (A50490)
1263 (A50490)
Kubota 24in Quick Attach Compact Excavator Tooth Bucket (A52748)
Kubota 24in Quick...
2011 GALYEAN 130BBL VAC TRAILER (A52472)
2011 GALYEAN...
KOOMEY INC VALVE ACTUATOR (A52472)
KOOMEY INC VALVE...
2019 INTERNATIONAL 4300 26FT NON CDL BOX TRUCK (A52576)
2019 INTERNATIONAL...
2016 LINK-BELT  235X3 SPIN ACE EXCAVATOR (A52472)
2016 LINK-BELT...
 
Top