Temporary Trade: Dead Toolcat for A300 Skid

   / Temporary Trade: Dead Toolcat for A300 Skid #11  
SPSX6

My 2 speed S300 runs 6-7 mph in low and 12 mph in high.
 
   / Temporary Trade: Dead Toolcat for A300 Skid
  • Thread Starter
#12  
Update: Gave back the A300 and got the TC back. Very impressed with the work the dealer did. I'm glad to have an enclosed cab again as the A300 was open cockpit. One note of interest: All my turbocharger mounting hardware was loose and the thing had a pretty good leak. The tech really focused on making sure I would check that hardware in the future. My TC has about 860 hours on it.
 
   / Temporary Trade: Dead Toolcat for A300 Skid #13  
Spudgunner,

Excellent "heads up"!

I will be adding that to our "between storm" check list!

Tim
 
   / Temporary Trade: Dead Toolcat for A300 Skid #14  
....One note of interest: All my turbocharger mounting hardware was loose and the thing had a pretty good leak.

So that meant you were smoking black at times????

Did you overheat at all during the goat rope???
 
   / Temporary Trade: Dead Toolcat for A300 Skid
  • Thread Starter
#15  
So that meant you were smoking black at times????

Did you overheat at all during the goat rope???

Words from the tech, "We were able to remove most of the soot from the bottom of the bed."

No overheating...I think. "During the goat rope" ??? I hesitate to ask...
 

Tractor & Equipment Auctions

2020 KUBOTA SVL95-2S SKID STEER (A52706)
2020 KUBOTA...
2007 Ford Five Hundred SEL Sedan (A55853)
2007 Ford Five...
Rooster Artwork (A55758)
Rooster Artwork...
2014 Ford F-150 Ext. Cab Pickup Truck (A53422)
2014 Ford F-150...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
14' Bi-Parting Gate (A50120)
14' Bi-Parting...
 
Top