Temporary Trade: Dead Toolcat for A300 Skid

   / Temporary Trade: Dead Toolcat for A300 Skid #11  
SPSX6

My 2 speed S300 runs 6-7 mph in low and 12 mph in high.
 
   / Temporary Trade: Dead Toolcat for A300 Skid
  • Thread Starter
#12  
Update: Gave back the A300 and got the TC back. Very impressed with the work the dealer did. I'm glad to have an enclosed cab again as the A300 was open cockpit. One note of interest: All my turbocharger mounting hardware was loose and the thing had a pretty good leak. The tech really focused on making sure I would check that hardware in the future. My TC has about 860 hours on it.
 
   / Temporary Trade: Dead Toolcat for A300 Skid #13  
Spudgunner,

Excellent "heads up"!

I will be adding that to our "between storm" check list!

Tim
 
   / Temporary Trade: Dead Toolcat for A300 Skid #14  
....One note of interest: All my turbocharger mounting hardware was loose and the thing had a pretty good leak.

So that meant you were smoking black at times????

Did you overheat at all during the goat rope???
 
   / Temporary Trade: Dead Toolcat for A300 Skid
  • Thread Starter
#15  
So that meant you were smoking black at times????

Did you overheat at all during the goat rope???

Words from the tech, "We were able to remove most of the soot from the bottom of the bed."

No overheating...I think. "During the goat rope" ??? I hesitate to ask...
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2007 IH 4300 Dump Truck (A47384)
2007 IH 4300 Dump...
Harrell 3605 (A50123)
Harrell 3605 (A50123)
1996 International Water Truck with a Caterpillar Engine (A55301)
1996 International...
24" Backhoe Bucket (A50775)
24" Backhoe Bucket...
2002 Ford F-250 4x4 Crew Cab Pickup Truck (A55788)
2002 Ford F-250...
 
Top