TC40D hydrostatic pedals no resistance

   / TC40D hydrostatic pedals no resistance #1  

ConCon

New member
Joined
Jul 13, 2021
Messages
5
Tractor
123Tractor
Pedals completely went out on TC40D. There was no warning. Does anyone have a schematic on how this functions or ideas?
 
   / TC40D hydrostatic pedals no resistance #2  
Welcome to the forum. It could be as simple as a linkage becoming disconnected. Take a peek under the footplate and see if anything is dangling. If you have a 'rocker' pedal you'd only feel the resistance of the centering spring. If you can reach up and work the pedal by hand you might be able to see what moves and what doesn't down below. (Model-specific help will be along shortly.)
 
   / TC40D hydrostatic pedals no resistance #3  
Check out this thread on this common failure mode on these tractors. Hope this helps.

Thread 'Where the TC45D is NOT deluxe' Where the TC45D is NOT deluxe
 
   / TC40D hydrostatic pedals no resistance
  • Thread Starter
#5  
Welcome to the forum. It could be as simple as a linkage becoming disconnected. Take a peek under the footplate and see if anything is dangling. If you have a 'rocker' pedal you'd only feel the resistance of the centering spring. If you can reach up and work the pedal by hand you might be able to see what moves and what doesn't down below. (Model-specific help will be along shortly.)
Thank you - will be working on it this evening.
 
   / TC40D hydrostatic pedals no resistance
  • Thread Starter
#8  
Thanks everyone. We had lost the #16 spring (per the schematic y’all shared with me). Thanks for the resources. We are up and running!
 

Tractor & Equipment Auctions

2020 Case CX245D SR Excavator (RIDE AND DRIVE) (A50774)
2020 Case CX245D...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
Unused 2025 CFG QK16R Mini Excavator (A50322)
Unused 2025 CFG...
2006 Audi A6 Sedan (A50324)
2006 Audi A6 Sedan...
Massey Ferguson 65 Loader Tractor (A50514)
Massey Ferguson 65...
2012 Ford F250 4x4 Pickup Truck (A50323)
2012 Ford F250 4x4...
 
Top