skeeballhead
New member
- Joined
- Jul 31, 2007
- Messages
- 14
My shuttle shift is hard to shift, both the Forward and Reverse, as well as the 1-4 gear selector. I removed the cowling to expose the arms and joint mechanism. It in turn goes into the clutch housing. There are three bolts for each cover on those shift arms. I understand there are zerks on those arms inside the clutch housing. Will I have any problems removing the covers and pulliing those arms out to grease those zerks to hopefully help with easing up the shifting? I just didn't want to remove that and have something fall into the trans or something crazy. Any help would be greatly appreciated. The upper part behind the cowling is easy to get at, so I am not worried about that. Thanks. Lance
