TC35DA Footwell Toolbox Does Not Fit TC35A

   / TC35DA Footwell Toolbox Does Not Fit TC35A #1  

Redneck_Randy

Platinum Member
Joined
Mar 27, 2006
Messages
578
Location
Oklahoma
Tractor
2005 New Holland TC35A
It does fit the contours just fine except for one thing, you can't go into high range. The shift bar hits the box never letting you select high range. Easy fix though. First pic shows narrowing the gap on the lower flat bar for the shift linkage.
 

Attachments

  • 889074-bar.jpg
    889074-bar.jpg
    28.7 KB · Views: 283
   / TC35DA Footwell Toolbox Does Not Fit TC35A
  • Thread Starter
#2  
It does fit the contours just fine except for one thing, you can't go into high range. The shift bar hits the box never letting you select high range. Easy fix though. First pic shows narrowing the gap on the lower flat bar for the shift linkage.
 
   / TC35DA Footwell Toolbox Does Not Fit TC35A
  • Thread Starter
#3  
Showing now where the shifter is located in high range.
 

Attachments

  • 889075-shift.jpg
    889075-shift.jpg
    28.8 KB · Views: 261
   / TC35DA Footwell Toolbox Does Not Fit TC35A
  • Thread Starter
#4  
Showing now where the shifter is located in high range.
 
   / TC35DA Footwell Toolbox Does Not Fit TC35A
  • Thread Starter
#5  
Low range. You can guess where Mid range is. LOL
 

Attachments

  • 889076-shift1.jpg
    889076-shift1.jpg
    22.7 KB · Views: 221
   / TC35DA Footwell Toolbox Does Not Fit TC35A
  • Thread Starter
#6  
Low range. You can guess where Mid range is. LOL
 
   / TC35DA Footwell Toolbox Does Not Fit TC35A
  • Thread Starter
#7  
Encontered one other problem. The lower part of the shift bar now was hitting the back of the PTO safety switch. Easy fix. I popped it out and turn it around and. Wires are now on the opposite side by the shift bar.

Randy
 

Attachments

  • 889078-safe.jpg
    889078-safe.jpg
    20.8 KB · Views: 211
   / TC35DA Footwell Toolbox Does Not Fit TC35A
  • Thread Starter
#8  
Encontered one other problem. The lower part of the shift bar now was hitting the back of the PTO safety switch. Easy fix. I popped it out and turn it around and. Wires are now on the opposite side by the shift bar.

Randy
 
   / TC35DA Footwell Toolbox Does Not Fit TC35A
  • Thread Starter
#9  
Also added an extra nut and bolt to the box so it wouldn't rock around so much.

Randy
 

Attachments

  • 889081-box.jpg
    889081-box.jpg
    27.3 KB · Views: 212
   / TC35DA Footwell Toolbox Does Not Fit TC35A
  • Thread Starter
#10  
Also added an extra nut and bolt to the box so it wouldn't rock around so much.

Randy
 

Tractor & Equipment Auctions

2012 Ford F-550 4x4 Versalift VO36I-01 36ft Insulated Bucket Truck (A49461)
2012 Ford F-550...
3000 Gallon Black Poly Water Tank (A49461)
3000 Gallon Black...
2009 JOHN DEERE 135D EXCAVATOR (A51242)
2009 JOHN DEERE...
2014 Yale 3 stage 8500lbs lift solid tire forklift (A51039)
2014 Yale 3 stage...
2019 CATERPILLAR 299D2 XHP SKID STEER (A51242)
2019 CATERPILLAR...
2013 John Deere 35D Mini Excavator (A49461)
2013 John Deere...
 
Top