Tar River 185 drum mower question

   / Tar River 185 drum mower question #1  

circled

Bronze Member
Joined
Jul 30, 2018
Messages
52
Location
Ohio
Tractor
Kubota M6800, RK 24
Looking at 185 drum mower. Can't find a spec for offset in cutting position. Tractor is 84 inches outside rear tread to tread. I am trying to figure out if the 185 will extend beyond my tread in cutting position. My tractor has telescoping 3 pt arms. Would I just skew them over to cutting side?
Thanks!
 
   / Tar River 185 drum mower question #2  
Looking at 185 drum mower. Can't find a spec for offset in cutting position. Tractor is 84 inches outside rear tread to tread. I am trying to figure out if the 185 will extend beyond my tread in cutting position. My tractor has telescoping 3 pt arms. Would I just skew them over to cutting side?
Thanks!
It sounds like your drum mower is mounted behind your tractor.

All the drum mowers I have seen, when moved from the towing position to the cutting position cut beyond the right rear tire. The mower has a pivot pin and is either manually or hydraulically moved from towing position to cutting position.
 
   / Tar River 185 drum mower question
  • Thread Starter
#3  
It sounds like your drum mower is mounted behind your tractor.

All the drum mowers I have seen, when moved from the towing position to the cutting position cut beyond the right rear tire. The mower has a pivot pin and is either manually or hydraulically moved from towing position to cutting position.
Yes Jerry, you are correct. I am trying to find out how far past/what distance this mower will set in cutting position as to not be smashing down with the right rear wheel what I'm cutting. Thanks for the reply!
 
   / Tar River 185 drum mower question
  • Thread Starter
#4  
Yes Jerry, you are correct. I am trying to find out how far past/what distance this mower will set in cutting position as to not be smashing down with the right rear wheel what I'm cutting. Thanks for the reply!
Update: Tar River rep just gave me offset. 36 inches for the 185 and 42 inches for the 210. That is his measure of inner most cutting edge to centerline with pto shaft straight.
 

Tractor & Equipment Auctions

2016 New Holland Boomer 47 4WD Front Loader Utility Tractor with Bush Hog BH16-2 (A50322)
2016 New Holland...
2020 INTERNATIONAL LT625 SLEEPER (A50854)
2020 INTERNATIONAL...
2008 CATERPILLAR 320D L (A50854)
2008 CATERPILLAR...
2017 FREIGHTLINER M2 BOX TRUCK (A51222)
2017 FREIGHTLINER...
1999 Ford F450 Dump / Plow Truck (A50514)
1999 Ford F450...
2015 MACK GU713 (A50854)
2015 MACK GU713...
 
Top