T394c

[meltek]

Hello all, I am looking at a t394c, I was wondering if anyone has added rear remotes to there's. I know summit makes a kit amd have seen some YouTube videos on it, but I am curious if it will still work on the cab models?

 

[Digityman]

Doesn't the 394 already have a set of rear remotes? I have the 474 which is just a bigger engine (48hp vs 39hp) I thought. If so, it should have one set of rear remotes on the back.

 

[Torvy]

I think rear remotes are optional on the 394/474. The 494/574 has 2 sets standard.

 

[MtnViewRanch]

Electric actuated rear remotes are not the ideal control for a top & tilt set or various implement cylinders.
Ideally you want to be able to feather the controls, pretty difficult when you have a valve that is either open all the way or closed.

Don't get me wrong, it can and is done all the time. But that doesn't make it the ideal method.

When it comes to cab tractors, your best way to go is the factory option IMO.

 

[TractorTYMe]

Option on 394, 1 standard on the 474.

 

[Torvy]

Option on 394, 1 standard on the 474.

Thanks! I looked all over and it looked like optional. Once you posted this, presto, I found it!