I have a brand new T25 that ran for about 2 hours then stalled and will only run briefly then stop. I found that whenever I start it it blows a 7.5 amp fuse. The fuse is labeled “E/G STOP”. Can anyone tell me where i can check to correct this. I have no idea what E/G STOP indicates. Thanks!
T25 Fuse identification
- Thread starter Kgkessler
- Start date
- Views: 3316
MapleLeafFarmer
Platinum Member
- Joined
- Jun 20, 2011
- Messages
- 730
- Location
- Canada
- Tractor
- lots including Kubota B's, L's, cat, etc.. over many years
check your wiring for a short against your frame or wet or maybe mouse damage.
The wires I am thinking about come from the connector that is to the left and slightly higher than your engine oil dip stick. (rhs tractor near floor board)
Check to see if wet or insulation rubbed off/eaten etc....
let us know what you find
The wires I am thinking about come from the connector that is to the left and slightly higher than your engine oil dip stick. (rhs tractor near floor board)
Check to see if wet or insulation rubbed off/eaten etc....
let us know what you find
