Strobes on Kubota BX

[cccamrd]

I also bought a set of 4 strobes with control box on Ebay for my BX for $10. They shipped from China with no problem.

 

[panchohughes]

1. not really a 'control box'... but rather the strobes have a lead that when connected to hot, will change the flash sequence.
2. Yes. I connected each control lead (see #1) from the strobe together, then to a momentary switch. It is a push button. Each time i press it, all strobes advance to the next flash pattern. I think they have something like 10 different flash patterns.

 

[cccamrd]

In regard to my particular strobe system:
1.) It is a control box.
2.) It has a on and off switch and 3 switches to alter the flash patterns.
3.) For 10 bucks.... well worth the money.

 

[jb62901]

There are many this is one.


18 Red LED Car Auto Vehicle Flashing Strobe Flash Grille Decorate Lights 3 Modes | eBay

 

[RAYJAY]

There are many this is one.


18 Red LED Car Auto Vehicle Flashing Strobe Flash Grille Decorate Lights 3 Modes | eBay

than you

jeff

 

[CapsuleVirus4]

I installed strobe lights on my bx25 kubota, we wanted to install strobes light on are tractor because i use it to clear are sidewalks in my neighborhood because the city will not do it. I had the idea to putt the strobes lights on the safety bars cage but it’s too hard to make a hole thru it. So i found an other idea, i used 2 15 inch metal tool box to mount the lights on. I used 4 1-2/1 inch bolts to hold it on around the safety bar with an other metal plate. I used an 12 inch box to put the control panel on with the plugs for the lights.

And as a 16 year old this is really impressive.

 

[GolfAddict]

I installed strobe lights on my bx25 kubota, we wanted to install strobes light on are tractor because i use it to clear are sidewalks in my neighborhood because the city will not do it. I had the idea to putt the strobes lights on the safety bars cage but it’s too hard to make a hole thru it. So i found an other idea, i used 2 15 inch metal tool box to mount the lights on. I used 4 1-2/1 inch bolts to hold it on around the safety bar with an other metal plate. I used an 12 inch box to put the control panel on with the plugs for the lights.

And as a 16 year old this is really impressive.

Wow, they should be able to see you coming now! Good job!