Storage Length needed for Kioti NX5010 HST CAB with Loader/Bucket?

TN8Man · May 25, 2019

Anyone know minimum storage space needed for the Kioti NX5010 HST CAB with Loader/Bucket?

I plan to keep the tractor in a barn but not sure if I have enough free space. I can get the height and width from the Kioti site but they don't list length with loader and bucket.

chevy · May 25, 2019

The loader specs should give you the front reach with the loader lowered.

From the specs of the KL6010 loader, it looks like it is 70.9 inches.

PA hayseed · May 26, 2019

Anything on the 3 point? I can measure mine when I go out if you would like. Just keep in mind my bucket has a toothbar, it will stick out several inches further.

PA hayseed · May 26, 2019

Roughly 15' 3" with bucket down (with toothbar) and including drawbar/towbar. Without the toothbar/drawbar I doubt you would save a full foot. Hope it helps. I would have spent a little more time doing some other measurements, but a storm rolled in and I don't play around the tractor in lightning.

TN8Man · Jun 18, 2019

PA hayseed said:
Roughly 15' 3" with bucket down (with toothbar) and including drawbar/towbar. Without the toothbar/drawbar I doubt you would save a full foot. Hope it helps. I would have spent a little more time doing some other measurements, but a storm rolled in and I don't play around the tractor in lightning.

Thanks for your help!

Turns out I had enough room including having a rotory-cutter attached.