Starting problems Mustang 2054 Skid Steer

   / Starting problems Mustang 2054 Skid Steer
  • Thread Starter
#11  
I were doing some work on it yesterday, and I found the voltage to the ignition switch to be a bit wierd. So I took a spare wire, and hooked it up from the batery, and to the switch.
Then it started, and I ran it for about 30 min without any problems.
When I took the wire away, it were just acting up again.

So I believe there is a bad wire who is to blame of the fault.
 
   / Starting problems Mustang 2054 Skid Steer #12  
I were doing some work on it yesterday, and I found the voltage to the ignition switch to be a bit wierd. So I took a spare wire, and hooked it up from the batery, and to the switch.
Then it started, and I ran it for about 30 min without any problems.
When I took the wire away, it were just acting up again.

So I believe there is a bad wire who is to blame of the fault.

Excellent news, glad you got it running. Just be sure you didn't circumvent any safety features without knowing about it.
 
   / Starting problems Mustang 2054 Skid Steer
  • Thread Starter
#13  
I found the connection under the cab to be a weak link. So after it were soldered, the machine is like new :thumbsup:
 

Tractor & Equipment Auctions

2013 Volvo Semi Truck (NOT RUNNING)(TITLE) (A50774)
2013 Volvo Semi...
2016 Takeuchi TW40 Wheel Loader (RIDE AND DRIVE) (A50774)
2016 Takeuchi TW40...
Pickup Truck Bed (A51691)
Pickup Truck Bed...
GORBEL EASY ARM LIFTING ARM (A52472)
GORBEL EASY ARM...
2020 John Deere 260E 26 Ton Articulating Off-Road T/A Dump Truck (A50322)
2020 John Deere...
2012 Ram 1500 Crew Cab Pickup Truck (A50323)
2012 Ram 1500 Crew...
 
Top