Starting Problem on 245 Case IH

/ Starting Problem on 245 Case IH #1  

rickiegray

New member
Joined
Aug 19, 2014
Messages
1
Location
Greenville, NC
Tractor
245 Case IH
I have a 1986 Case 245 with a starting problem. I can short the solenoid switch with a screw driver and start with no problem. I have replaced the ignition switch and the solenoid and I still have the same problem. Does anyone know of anything else to check.
 
/ Starting Problem on 245 Case IH #2  
There are a few safety switches on that model. I'm familiar with the gear model. Range transmission in neutral. PTO off. Possible seat switch. Check to make sure they are closed. Also the ignition is prone to corrosion on the underside. Especially the center terminal. I have replaced mine three times. Once I had a loose connection.
Other issues I have found on these Case / Mitsubishi: Badly corroded battery ground at frame. As the battery cables age they tend to flex and brake. Making intermittent starting issues.
 

Marketplace Items

2020 INTERNATIONAL LT625 TRUCK TRACTOR SLEEPER (A59906)
2020 INTERNATIONAL...
Hays LT-1 Tender (A61307)
Hays LT-1 Tender...
2018 22ft. Tycorp Vector Belt VB-16H (A60352)
2018 22ft. Tycorp...
2019 MQ POWER WHISPERWATT DCA-25 GENERATOR (A58214)
2019 MQ POWER...
2019 Ford F150 XL (A57148)
2019 Ford F150 XL...
OVERLAND VACUUM TANK (A60736)
OVERLAND VACUUM...
 
Top