Starting Problem on 245 Case IH

/ Starting Problem on 245 Case IH #1  

rickiegray

New member
Joined
Aug 19, 2014
Messages
1
Location
Greenville, NC
Tractor
245 Case IH
I have a 1986 Case 245 with a starting problem. I can short the solenoid switch with a screw driver and start with no problem. I have replaced the ignition switch and the solenoid and I still have the same problem. Does anyone know of anything else to check.
 
/ Starting Problem on 245 Case IH #2  
There are a few safety switches on that model. I'm familiar with the gear model. Range transmission in neutral. PTO off. Possible seat switch. Check to make sure they are closed. Also the ignition is prone to corrosion on the underside. Especially the center terminal. I have replaced mine three times. Once I had a loose connection.
Other issues I have found on these Case / Mitsubishi: Badly corroded battery ground at frame. As the battery cables age they tend to flex and brake. Making intermittent starting issues.
 

Marketplace Items

1995 ISUZU NPR FLATBED TRUCK (A59908)
1995 ISUZU NPR...
1999 CATERPILLAR 312B EXCAVATOR (A52709)
1999 CATERPILLAR...
2017 Chevrolet Colorado Ext. Cab Pickup Truck (A61568)
2017 Chevrolet...
2008 DOOSAN G25 GENERATOR (A58216)
2008 DOOSAN G25...
UNKNOWN  SKIDDED FRAC TANK (A58214)
UNKNOWN SKIDDED...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
 
Top