Starting Problem on 245 Case IH

/ Starting Problem on 245 Case IH #1  

rickiegray

New member
Joined
Aug 19, 2014
Messages
1
Location
Greenville, NC
Tractor
245 Case IH
I have a 1986 Case 245 with a starting problem. I can short the solenoid switch with a screw driver and start with no problem. I have replaced the ignition switch and the solenoid and I still have the same problem. Does anyone know of anything else to check.
 
/ Starting Problem on 245 Case IH #2  
There are a few safety switches on that model. I'm familiar with the gear model. Range transmission in neutral. PTO off. Possible seat switch. Check to make sure they are closed. Also the ignition is prone to corrosion on the underside. Especially the center terminal. I have replaced mine three times. Once I had a loose connection.
Other issues I have found on these Case / Mitsubishi: Badly corroded battery ground at frame. As the battery cables age they tend to flex and brake. Making intermittent starting issues.
 

Marketplace Items

2020 DRAGON 150 BBL ALUMINUM VACUUM TRAILER (A60736)
2020 DRAGON 150...
1981 LINK BELT HSP 8028 (A58214)
1981 LINK BELT HSP...
2001 Ford F-550 Truck, VIN # 1FDAF56F61ED50387 (A61165)
2001 Ford F-550...
FORD 8530 TRACTOR (A58375)
FORD 8530 TRACTOR...
2025 AGT Industrial MX-CRT23 (A60463)
2025 AGT...
12ft 9in Altec Service Bed (A61165)
12ft 9in Altec...
 
Top